README

[EXPERIMENTAL] Cypress adapter for Tappet GUI testing.

See the Tappet core README for the core Tappet concepts - arrange/act/assert specs, fixtures, pages, and in particular transitions, the mechanism used to detect and assert on whole-page-state changes such as navigation or a modal opening/closing. This README only covers what's specific to the Cypress adapter, including how custom transition detection is wired up here.

Installation

Prerequisites

PHP 8.1 or later
Composer

1. Install the adapter

composer require --dev tappet/cypress

npm install --save-dev cypress @tappet/cypress

2. Configure the adapter

Create tappet.{suite-name}.suite.php in the root of your project, for example:

tappet.cypress.suite.php (to name the suite cypress):

<?php

declare(strict_types=1);

use Tappet\Cypress\Suite\CypressSuite;

$suite = new CypressSuite(
    cypressRoot: __DIR__ . '/tests/gui' // Points to the nested Cypress project created for Tappet.
);

$suite->addPlugin(new MyPlugin());

return $suite;

3. Install Cypress

node_modules/.bin/cypress install

mkdir -p tests/gui

Inside the nested Cypress project directory referenced by cypressRoot above (e.g. tests/gui), scaffold a Cypress project along with this package's JS/TS half, which provides the Uniter defineConfig factory and Cypress plugin that bridge PHP and JavaScript:

cd tests/gui

# Cypress does not support an "init" CLI command: instead, run `open` once to scaffold a Cypress project.
# Continue until you get to the "We added the following files to your project:" stage, then you can close Cypress.
../../node_modules/.bin/cypress open

# By this point, the file `cypress.config.js` should exist:
ls -l cypress.config.js

Update cypress.config.js to register tappet/cypress:

cypress.config.js

const { defineConfig } = require('cypress');
const { register: tappetPlugin } = require('@tappet/cypress/cypress/plugin');

module.exports = defineConfig({
    e2e: {
        setupNodeEvents(on, config) {
            // Configure Cypress to run Tappet specs.
            return tappetPlugin(on, config);
        },
        // Path to where your Tappet PHP spec files will live.
        specPattern: 'spec/**/*.spec.php',
    },
    // Other config, e.g.:
    defaultCommandTimeout: 20000,
    pageLoadTimeout: 60000,
});

In the same directory, create a uniter.config.js to configure Uniter, which is used to run PHP code under a JavaScript environment:

uniter.config.js

const { defineConfig } = require('@tappet/cypress/uniter/defineConfig');

/*
 * Configures Uniter, which is a PHP-to-JavaScript transpiler.
 *
 * This configuration allows Cypress to run Tappet specs written in PHP.
 */
module.exports = defineConfig(__dirname, '../../', {
    include: [
        // If your suite is named "cypress".
        'tappet.cypress.suite.php',
        // It is recommended to .gitignore this `.local.php` file: it allows you to keep local overrides
        // for the config that you do not want to commit, e.g. local dev environment URLs.
        'tappet.cypress.suite.local.php',
        'tests/gui/app/**/*.php',

        // Include any other needed PHP files here, including those from `vendor/`.
    ],
});

Now you can create your specs, for example tests/gui/spec/Workflow/create_workflow.spec.php. Note that the spec/ part of the path was defined by specPattern: 'spec/**/*.spec.php' in cypress.config.js above.

Custom transition detection

Tappet core defines what a transition is (TransitionInterface) and how specs assert on one (EnvironmentInterface::assertTransition()). However, detection of a transition occurring is necessarily adapter-specific, since it depends on hooking into the underlying test tool. This package detects transitions by dispatching events during the Cypress test run that plugins can listen to, and pushing detected transitions onto the shared transition log via CypressAutomationInterface::pushTransition(TransitionInterface $transition): void.

The built-in NavigationTransition is pushed automatically by this adapter whenever the AUT's window fires a load event; for plain page navigation, there is nothing you need to wire up. Anything else, such as a modal appearing or disappearing, needs a plugin.

Writing a plugin

A plugin implements Tappet\Suite\Plugin\PluginInterface (from tappet/tappet core) and declares a map of event class to listener. The most relevant event for transition detection is WindowBeforeLoadEvent, fired before each AUT window load with access to $window, a Uniter FFI wrapper of the browser's Window object so that JS methods/properties (e.g. $window->document, $window->MutationObserver) can be called/used from PHP.

Continuing the modal example from the core README, here's how tappet/tappet's own test suite detects data-ui-modal elements toggling their hidden attribute, using a MutationObserver, and pushes the corresponding ModalOpenTransition/ModalClosedTransition:

class TestPlugin implements PluginInterface
{
    public function getListeners(): array
    {
        return [
            WindowBeforeLoadEvent::class => function (EventInterface $event, CypressAutomationInterface $automation): void {
                $window = $event->getWindow();

                $observer = new $window->MutationObserver(
                    function ($mutations) use ($automation): void {
                        foreach ($mutations as $mutation) {
                            if ($mutation->type !== 'attributes' || $mutation->attributeName !== 'hidden') {
                                return;
                            }

                            $el = $mutation->target;
                            $handle = $el->getAttribute('data-ui-modal');

                            if (!$handle) {
                                return;
                            }

                            $isVisible = !$el->hasAttribute('hidden');

                            $automation->pushTransition(
                                $isVisible
                                    ? new ModalOpenTransition($handle)
                                    : new ModalClosedTransition($handle)
                            );
                        }
                    }
                );

                $window->document->addEventListener(
                    'DOMContentLoaded',
                    function () use ($observer, $window): void {
                        $observer->observe($window->document->body, [
                            'subtree' => true,
                            'attributes' => true,
                            'attributeFilter' => ['hidden'],
                        ]);
                    }
                );
            },
        ];
    }
}

ModalOpenTransition/ModalClosedTransition and their matching ExpectModalOpen/ExpectModalClosed arrangement/assertion classes are just application-level TransitionInterface/ArrangementInterface/ AssertionInterface implementations - see the core README's transitions section for how those interfaces work. Nothing about them is Cypress-specific; only the detection plugin above is.

Registering a plugin

<?php

declare(strict_types=1);

use Tappet\Cypress\Suite\CypressSuite;

$suite = new CypressSuite(__DIR__);

$suite->addPlugin(new TestPlugin());

return $suite;

Custom behaviour extension

Other *InitEvent classes in Tappet\Cypress\Event (FieldActionInitEvent, FieldAssertionInitEvent, InteractionInitEvent, MatchHandlerInitEvent, RegionAssertionInitEvent, StateAssertionInitEvent) follow the same plugin-listener mechanism, but are for registering custom field actions, field assertions, interactions, matchers, matchers, region assertions and state assertions respectively rather than for transition detection.

For example:

<?php

declare(strict_types=1);

namespace MyApp\Tests\Tappet\Plugin;

use MyApp\Tests\Tappet\MatchHandler\BadgeMatchHandler;
use Tappet\Common\Event\EventInterface;
use Tappet\Cypress\Automation\CypressAutomationInterface;
use Tappet\Cypress\Event\MatchHandlerInitEvent;
use Tappet\Suite\Plugin\PluginInterface;

/**
 * @implements PluginInterface<CypressAutomationInterface>
 */
class MyPlugin implements PluginInterface
{
    public function getListeners(): array
    {
        return [
            MatchHandlerInitEvent::class => function (EventInterface $event): void {
                /** @var MatchHandlerInitEvent $event */
                $event->registerMatchHandler('badge', new BadgeMatchHandler($event->getAutomation()));
            },
        ];
    }
}

tappet / cypress

Maintainers

Package info

Statistics

Security