README

A LibreNMS plugin that checks per device whether certain rules are present or absent in the configuration. Configurations are read from Oxidized — the plugin does not connect to your devices and does not change anything.

• Read-only — only checks, never fixes
• Daily scan via a cron job
• Own storage in JSON files (storage/app/config-compliance/)
• LibreNMS style — uses the standard LibreNMS layout

Version: v1.11.2 · License: GPL-3.0-or-later

New to the plugin? Read the step-by-step Getting started guide — from zero to your first compliance alert.

Requirements

• LibreNMS with plugin system v2 (recent version)
• A working Oxidized integration — check that the Configs tab of a device shows the current config
• PHP 8.2 or higher

Installation

The recommended way is lnms plugin:add, which installs the plugin from Packagist without touching LibreNMS' own dependencies. Run as the librenms user:

sudo -u librenms /opt/librenms/lnms plugin:add palerm0/librenms-config-compliance

Then enable it from the LibreNMS web UI under Overview » Plugins, or from the command line:

sudo -u librenms /opt/librenms/lnms plugin:enable config-compliance

A menu item Config Compliance now appears under the plugin menu.

Updating

When a new version is released on Packagist, run the same command again to pick it up:

sudo -u librenms /opt/librenms/lnms plugin:add palerm0/librenms-config-compliance
sudo -u librenms /opt/librenms/lnms view:clear

plugin:add is idempotent — if the latest version is already installed it does nothing, otherwise it fetches the new release from Packagist.

Troubleshooting

Web UI crashes (500) after enabling the plugin — some LibreNMS installations keep stale cached routes or views from before the plugin was added. Clearing them solves it:

cd /opt/librenms
sudo -u librenms php artisan cache:clear
sudo -u librenms php artisan view:clear
sudo -u librenms php artisan route:clear

Then reload the page.

Configuration

1. Open the plugin page, click the gear button (top right) and fill in the Oxidized URL (e.g. http://127.0.0.1:8888) — the same URL as under Global Settings » External Settings » Oxidized. The page shows a status line that confirms whether Oxidized is reachable, or warns if it is not configured or cannot be reached.

2. Add your rules under Compliance rules. Per rule:

   Field	Meaning
   Name	Short description, e.g. "NTP configured"
   Group	Which LibreNMS device group the rule applies to (* = all)
   OS	Which device OS the rule applies to (* = all)
   Checks	One or more checks — see below

   Every rule has one or more checks. For each check you pick a Type and a Pattern:

   Type	Passes when
   Contains	the pattern is present in the config
   Does not contain	the pattern is absent
   Contains any of	at least one of the listed patterns is present (one per line)
   Contains none of	none of the listed patterns is present (one per line)
   Matches regex	the regular expression matches the config
   Does not match regex	the regular expression does not match the config

   The rule as a whole passes only if all checks pass. The "any of" / "none of" types take one pattern per line and are handy when the same thing looks slightly different per device or location (e.g. a firewall object name that varies between sites).

   The regex types use standard PCRE and match per line (so ^ and $ anchor to each config line, e.g. ^hostname \S+). A regex check passes on the first match; use \A / \z for the absolute start/end of the whole config. The editor validates the expression live and an invalid regex always fails the check.

   A rule applies to a device when both Group and OS match. Tip: the exact OS name (such as ios, vrp, fortigate) is shown in the OS column of the results table after the first scan. In the editor the rules are grouped into collapsible sections per OS, so a long list stays tidy; rules with OS * sit in an "All OS" section at the bottom.

   In the results table two coloured badges show the state: Failed checks per device (green 0 / orange 1–5 / red more than 5) and, per failed rule, the number of failed checks (orange = partly, red = all failed). Click a failed rule name to expand it and see exactly which checks failed. Device names link straight to the device page in LibreNMS.

3. Click Scan now for an immediate scan.

Daily scan via cron

Add a line to /etc/cron.d/librenms:

# Config compliance scan, every day at 06:00
0 6 * * *   librenms   /opt/librenms/lnms config-compliance:scan >> /opt/librenms/logs/config-compliance.log 2>&1

Running it manually also works:

/opt/librenms/lnms config-compliance:scan

Statuses

A device that is down in LibreNMS is still scanned against its last known config, and gets an extra grey Down label next to its status.

Alerting

After every scan the plugin writes a LibreNMS component per scanned device (type config-compliance) with the compliance status, so you can use the normal LibreNMS alerting system — including your existing transports such as e-mail or Microsoft Teams.

Component status codes:

The failed rule names are stored in the component's error field, so they show up in the alert details.

Example alert rule (Alerts » Alert Rules » Create):

• component.type equals config-compliance
• AND component.status equals 2

Or, using LibreNMS' built-in component macros (this variant also honours the component's ignore flag, so you can exclude individual devices from alerting):

• macros.component_critical equals 1
• AND component.type equals config-compliance

Set the severity to your liking. Use >= 1 instead of = 2 if missing Oxidized configs should also alert. Note that alerts follow the scan schedule: with a daily cron scan, a device that drifts out of compliance during the day raises the alert after the next scan.

Two practical tips:

• Attach a transport to the rule (or have a default transport set up), otherwise the alert shows in the LibreNMS UI but no notification is sent.
• Consider severity Warning rather than Critical: compliance drift is important but rarely urgent, and this keeps it visually distinct from device-down alerts.

LibreNMS updates

Because lnms plugin:add registers the plugin through LibreNMS' own plugin machinery, you do not need any custom steps after ./daily.sh — the plugin stays linked across LibreNMS updates.

For contributors / local development

If you want to run the plugin from a local clone (to develop or hack on it rather than installing from Packagist), link the folder directly:

git clone https://github.com/Palerm0/librenms-config-compliance \
  /opt/librenms/plugins-src/librenms-config-compliance

cd /opt/librenms

composer config repositories.config-compliance \
  '{"type": "path", "url": "plugins-src/librenms-config-compliance", "symlink": true}'

composer require palerm0/librenms-config-compliance @dev

With the symlink in place you can edit the files in plugins-src and the changes take effect immediately (run ./lnms view:clear after Blade edits).

When using this path the local link can be reset by ./daily.sh; in that case re-run the two composer commands above (e.g. from a post-update.sh).

Files

librenms-config-compliance/
├── composer.json
├── routes/web.php
├── resources/views/
│   ├── menu.blade.php          Menu item
│   └── page.blade.php          The plugin page
└── src/
    ├── ConfigComplianceProvider.php   Bootstrap file (registers everything)
    ├── ComplianceEngine.php           Core logic: rules, scan, storage
    ├── Console/ScanCommand.php        The 'lnms config-compliance:scan' command
    ├── Controllers/CompliancePageController.php
    └── Hooks/MenuEntry.php            Menu hook

The plugin keeps its data in storage/app/config-compliance/: settings.json, rules.json, results.json and history.json.